

| Subject: | Re: Heater under back seat |
| From: | Germain |
| Date: | Sun, 8 Jun 2003 22:32:23 -0400 |
Hi John My Westy is a 87. Maybe it is different. The cover is made of wood and cover all the heater assembly (there are screw on each side and on the top). I also noticed a small coolant leak on the lower pipe. I don't know where the leak is coming from (the pipe or the heater). You where taking about an O-ring. Maybe this is my problem also. Germain ----- Original Message ----- From: "John Meeks" <jmeeks@gaslightmedia.com> To: "Germain" <reglys@SYMPATICO.CA>; <vanagon@GERRY.VANAGON.COM> Sent: Sunday, June 08, 2003 10:05 PM Subject: RE: Heater under back seat > Germain, > I have the same problem except that I couldn't remove the cover because the > air duct comes thru the cover. How did you get yours off? I need to check > the O-Ring seal or some other source of a slight odor coming from that > heater. > My next move was going to be to remove the whole bench to get to it. I > guess I'' wait to see if some list members have figured it out before I do > anything stoopid...;=) > Regards, > John Meeks > '91 Westfalia Multivan > > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf > Of Germain > Sent: Sunday, June 08, 2003 9:38 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Heater under back seat > > > Hi All > > I was cleaning my van the other day and specially under the back seat. I > removed the small cover to get access to the heater. I was trying to unscrew > all the heater assembly to clean the unit. The previous owner had a dog and > the blower is full of hair dog and small paper gum. Is there any easy way to > unscrew the screw on the right side? This screw is not easy to reach. The > motor is blocking the access to the screw. > > Thank you > > Germain >
Have something to add on this topic today? Revive this thread in the forum »