

| Subject: | Re: Radiator fan dead?...FIXED!!! |
| From: | Kevin Curry |
| Date: | Sat, 21 Jun 2003 04:52:46 -0400 |
Hi, Well, I'm a happy camper! Here's the story. I tried jumping the thermoswitch...nothing. I replaced the resistor behind the driver's headlight...no change. I went to a parts yard today and found an Audi 5000S...I found out from another lister that they have the same fan (the chances of finding the correct year Vanagon in a yard are slim)...I pulled the fan (Audi part#443-959-455E as opposed to VW #251-959-455M)), they wanted $31 for it, but I had left my wallet at home, so I stashed it in another car for tomorrow. It's identical to the one in my Syncro. I got home and ran 12v directly from the battery...my fan works, so I guess the one at the yard will go to waste...or perhaps I'll go and grab it to have as a spare or for a fellow lister who needs it (and yes, I tested it and it works) I then re-read some older posts and came across one describing the same situation as mine. (Bill Transue on Sept 2, 2000...I sent him a thank you email, but it was bounced back). His remedy was to clean up the grounds that are situated behind the fuse panel (those two hubs that hold 8 grounds each). He mentioned in his post that one of these was clean and the other corroded (same situation as mine) and upon his cleaning them up, everything worked fine. I also pulled the relay that is above and behind the fuse panel as it appeared to have some corrosion or dirt on it (it looked OK with a bit of white powder on it which I cleaned off). It's a pain working back there as it's a spaghetti bowl of wires, but I managed to clean them as best I could...not as clean as I would've liked, but MUCH better. I hooked everything back up and tried jumping the thermoswitch again...YESSSSS!! BOTH speeds!!! I then turned the A/C dial and the sweet sound of the low speed fan filled the night air...(sorry about that). I don't know if the corrosion on this hub involved my originally loosing low speed or if that was just a coincidence., as the resistor behind the driver's headlight WAS badly cracked). My thanks to all who offered their assistance...hopefully THIS info will help someone else out. Kevin Curry '87 Syncro Westy (stayin' cool)
Have something to add on this topic today? Revive this thread in the forum »