I was going to install a remote cooler on my van.had bought it and
everything.  BUT.......

could not see a way to route the lines that would not come in contact with
the exhaust pipes.

If anyone has done this on a WBX, please send me pics and what you used.  It
is 95+ for about 6 months of the year where i live, and my oil temps get
high...........especially with a/c.
Adam P
81  Westy "The Brick "
70 Single Cab "Whitey"
74 Beetle "Ol Yeller"
73 Transporter (STILL at paint shop)
1988 Vanagon Wolfsburg
1976 Transporter (New CA bus)
1974 412 "Goldmember"
Used Vanagon Parts for sale (mostly aircooled)
----- Original Message -----
From: "John Connolly" <john@AIRCOOLED.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Friday, June 27, 2003 11:09 PM
Subject: Re: Oil block off adapter for WBX

> the stock filter and location is excellent. IMO, you should use the
sandwich
> adapter to run to the cooler, and retain the stock filter. We have one
that
> is also thermostatically controlled so the oil gets up to temp before
> running to the cooler.
>
> John
> Aircooled.Net Inc.
> > Does anyone know a source for a remote oil-filter adapter that will
> > replace the existing oil filter and provide an inlet and outlet oil line
> > that you can plump to an external oil cooler and filters?
> >
> >
>