I didn't worry about it.  I just put the torque converter on and let the
transmission
fill it as it ran.

Who rebuilt your transmission?  I have a couple that I need to have
done.

>>> Edward Maglott <emaglott@BUNCOMBE.MAIN.NC.US> 7/9/2003 6:58:47 PM
>>>
I'm putting my transaxle back in the van.  I had my TC rebuilt, so it
is
empty.  The rebuilder told me to put about half a quart of ATF in it
before
I install it.  I thought I had seen a reference in Bentley about this,
but
if I did, I can't find it now.  Any advice on this?

I've been scratching my head about how the TC ends up filled with ATF.
The
image I get is of it only filling halfway because the top half would
be
airlocked.  But I just now went "d'uh", the thing is spinning!  So the
heavy fluid would be slung to the outside, and the air would escape out
the
shaft.

So I guess the advantage of having some ATF already in there is to
just
help it get filled and to provide some lube on the initial run in
before it
gets filled?

Any other tips on starting and running a rebuilt AT for the first
time?

Thanks,
Edward