

| Subject: | Re: What do I need to do about this mirror!!! |
| From: | Bob Stevens |
| Date: | Wed, 23 Jul 2003 08:27:07 -0600 |
My original mirrors were just oxidized and the driver's has a small crack in the plastic repaired with a little glue. I bought new one's from a list vendor. I didn't like the distortions due to poor quality glass, but worse, they wouldn't stay put at hiway speed. I took them off 4 times to tighten the nut on the back and finally took them off the 5th time. They aren't usable, period. At least the originals have flat glass and stay where I put them. Bob Stevens '87 Syncro Westy http://groups.msn.com/BobsPhotoShare ----- Original Message ----- From: "David Brodbeck" <gull@GULL.US> To: <vanagon@GERRY.VANAGON.COM> Sent: Wednesday, July 23, 2003 7:04 AM Subject: Re: What do I need to do about this mirror!!! > I tried tightening up my existing mirrors, but it didn't help. The > plastic was cracked and no amount of tightening would keep them in place. > Gluing them in place with Locktite didn't work either, so I broke down and > bought new mirrors. They'll cost you $25-40 each depending on where you > get them, more if you buy convex ones. (I prefer flat mirrors in my Westy > because I can use them to judge distance when backing. There's not enough > visibility through the back window to help. I do add 2" diameter stick-on > convex mirrors to fill in the blind spots.) > > I still had to tighten up the tension nut on the bottom of the new mirror > (I've only installed the driver's side one, so far) but it's held position > while driving into some pretty stiff headwinds. > > My only complaint is the quality of the driver's side mirror I got is a > bit lacking -- the edges of the mirror are actually a bit concave, so > there are distortions in the image. It's usable, though. I got that one > from Parts Place. I've ordered the passenger side one from Bus Depot in > hopes it'll be better. > > > David Brodbeck, N8SRE > '82 Diesel Westfalia > '94 Honda Civic Si >
Have something to add on this topic today? Revive this thread in the forum »