Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Turbo Diesel 1.9L mounting in a Westy
From:Tromper
Date:Tue, 29 Jul 2003 23:26:47 -0700

I wonder if you couldn't mildly port a quantam or audi TD
manifold and get a better fit.  I have only seen pics of the 1.9td
so don't really know if it's just the size of the turbo or if it's
the position.

JT
Idle Speculator

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Michael Snow
Sent: Tuesday, July 29, 2003 8:27 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Turbo Diesel 1.9L mounting in a Westy

If you mount the 1.9TD in the same position as the stock 1.6D, it will
interfere with the engine lid.  The stock 1.6TD sold in Europe is
mounted in the 50 degree position, so the VW engineers must have thought
that oil drainage from the turbo would be adequate.  The turbocharger on
the 1.9TD is mounted in a different position, at least on the AAZ
engine.  This may or may not have a measurable effect on engine life.
Many 1.9TD owners have installed their engines in the 50 degree
position.  Despite much speculation about the issue, I have not heard a
single report of turbocharger failure attributed to doing it this way.

Mike Snow
1982 Westfalia diesel

Wengraf, John wrote:
>>I've heard various accounts about installing a new 1.9L diesel in a
vanagon.
>>
>>Can the enegine be mounted at 50 degrees and have no impairment on the
rear deck?
>>
>>Does mounting it in this way have any implication on reliability?  I was
told that Overland will no longer sell the 50 degree kit because there is a
problem getting oil to the turbo  (?? or something like that) when it is
mounted that way.
>>
>>Any insight would be much appreciated
>>
>>John Wengraf