My transporter was heavily undercoated by the previous owner and is very
quiet on the road. Only a bit of wind noise around the windows and only
a little tire/road feedback...

~Rich
86 Transporter

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Randy Charrette
Sent: Wednesday, August 06, 2003 3:10 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: [VANAGON] Noise Reduction

I lined my whole van floor with B-Quiet sound deadener and I helped
substantially. Cost a little under $200, but worth it for extended
trips. Let me know if you need info.

Randy

87' Syncro

>From: Fin Beven
>Reply-To: Fin Beven
>To: vanagon@GERRY.VANAGON.COM
>Subject: Noise Reduction
>Date: Wed, 6 Aug 2003 14:42:25 -0700
>
>I was considering ways to reduce engine noise and had a thought....
>
>What about filling the low areas in the "corrugated" engine compartment
cover with "silicone seal" or some similar caulking compound. Not just
the hatch-cover, but the whole top surface and forward-slanting front
surface of the engine / transmission enclosure.
>
>My concept is that this would be similar to the factory-supplied foam
pad that is under the rug in the central area of the van that similarly
levels-out the corrugation in that section of the floor.
>
>Any thoughts or other suggestions would be appreciated.
>
>Fin Beven
>'84 Vanagon GL, camper-conversion
>'90 Vanagon Carat, camper-to-be

  _____

Tired of spam? Get advanced junk  <http://g.msn.com/8HMLENUS/2734??PS=>
mail protection with MSN 8.