from what i remember on my 82, its the same way.  the 2 doughnuts (bushings) "fill" the larger hole in the radius arm (one goes in from top, one in from bottom), the metal sleve goes insde the 2 bushings, and the link then goes through the inside of the sleeve.  there are also 2 washers that go on top and bottom of the bushings.  then you bolt it up from the bottom.

dr

steve d <sdelasal@PEOPLEPC.COM> wrote:

>Hello - I have a broken drop link and upon removing the item initially found a 1/2 inch dia. tube in the radius arm that the drop link bolts thru.   The tub was rusted - I took a look at Bentley and saw that there is supposed to be a metal tube that sits there between the two rubber doughnuts. So, I belted the tub and it falls out. However, the resulting hole in the radius arm is now about 2cm diameter.  What I can't work out is whether the radius arm has corroded badly or whether a new replacement 'tube' will fit into the 2cm dia hole i.e. all is well.  I have a couple of photos' that I can email if anyone is interested and feels qualified to comment.
>
>At then end of the day I'm trying to establish if my radius arm has the correct sized hole or whether it is excessively corroded. Looking a the Bentley book, the hole does look 'big' but it not a very clear picture.
>
>Steve
>

__________________________________________________________________
McAfee VirusScan Online from the Netscape Network.
Comprehensive protection for your entire computer. Get your free trial today!
http://channels.netscape.com/ns/computing/mcafee/index.jsp?promo=393397

Get AOL Instant Messenger 5.1 free of charge.  Download Now!
http://aim.aol.com/aimnew/Aim/register.adp?promo=380455