Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: Rad fan speeds
From:Koren
Date:Fri, 8 Aug 2003 20:27:58 -0700

Possibly having rad fan troubles also. About a week after having the A/C
fixed, I was climbing a mountain in very hot weather and when the rad fan
kicked on, it sounded like the bearings were dry. It was very loud! Until now
I didn't know there were two speeds to the fan. I assume the loud humming
noise was the second speed. Or are my bearing dry? Has anyone attempted to oil
or grease the fan motor as preventative maintainance? Luckily since then the
fan has sounded normal, but I'm about to go out on a long cross country trip.
Any advice?

Thanks,

Koren
91 GL Westy
For going everywhere!

>>  -----Original Message-----
>> From:         Woten, Rodney
>> Sent: Thursday, August 07, 2003 9:10 AM
>> To:   'vanagon@GERRY.VANAGON.COM'
>> Subject:      Rad fan speeds
>>
>> List,
>>
>> I performed the test of the rad fan last night on our '87 Westy (with
>> A/C), as listed on Ken's website.  I could only get the fan to come on at
>> 1 speed, and I think it was probably high speed.  I'm pretty sure my fan
>> resistor's bad.  In fact,  I have a new one on the way already.  Given
>> that the resistor is bad, is this what should have happened???  Will the
>> other speed(s) not work until the resistor is replaced or did the test
>> show other problems with the fan/wiring/relays, etc????  I can never get
>> our van hot enough to have the high speed come on of it's own accord so I
>> can verify if it was high speed I was witnessing.  Also I've heard that
>> there is a pressure relief valve on the receiver/dryer for the A/C.  Can
>> anyone confirm this???  Is it the nipple the protrudes from the top of the
>> dryer???
>>
>>
>> TIA,
>> Rod Woten
>> '87 Westy
>> Des Moines, Iowa

Have something to add on this topic today? Revive this thread in the forum »