

| Subject: | Re: Vanagon Double Relay wiring confusion |
| From: | Tom Young |
| Date: | Tue, 19 Aug 2003 14:30:07 -0700 |
Richard: Thanks for the reply! Other than my #3 terminal wire being black, things are exactly the same! Part of the reason I figured the wire coming out of this terminal was "non-stock" was that the wire was very poorly attached to the connector. But maybe a PO just managed to tear out the original brown wire and came up with this. Thanks again! --------------------------------------------------------------- Tom Young '81 Vanagon Lafayette, CA 94549 '82 Westfalia --------------------------------------------------------------- ----- Original Message ----- From: "Richard A. Jones" <Jones@colorado.edu> To: <tomyoung1@comcast.net> Cc: <vanagon@gerry.vanagon.com> Sent: Tuesday, August 19, 2003 12:46 PM Subject: re: Vanagon Double Relay wiring confusion > > Tom: > > In my stock, non-California '81, here is what I see: > > > Left plug of double relay: > > > 1 2 3 > > 4 5 6 > > 7 8 9 > > > (Where 1 is closest to driver seat, 3 is closest to > passenger seat.) > > 1 blue/brown > 2 red coming from 6 > 3 brown ground going to screw that holds relay to firewall > 6 red/red to 2 > 8 red/blue to fuel pump > 9 black > > I can't find this ground in my '80-'81 Bentley wiring diagram. > I don't have the newer, bigger, later Bentley handy to check. > > Richard A. Jones > Boulder, Colorado
Have something to add on this topic today? Revive this thread in the forum »