You can be a butcher and cut the wires or you can be a pro and release
the metal pins unharmed from the plastic connector body. Do this with a
stiff metal tool such as a paper clip. Mark the locations before
removing the pins. There is a tiny metal tab that locks each pin in it's
hole in the connector body. Push the tab flat and pull the wire and pin
out.

Mark

Jason Willenbrock wrote:
>
> Hey All,
> Here is the first of many questions regarding my new project.  What is
> the easiest way to remove the power mirrors without cutting the
> wires.  It seems that there is a mount inside the door that is
> blocking the wire connectors from coming through.  do i remove this?
> or do I just have to cut the wires and then rebuild the connectors?
> By the way this is from a 87 wolfsburg.
> thanks
> Jason
>