In a message dated 8/21/2003 10:17:08 AM Pacific Daylight Time,
pooncerelli@HOTMAIL.COM writes:

> Here is the first of many questions regarding my new project.  What is the
> easiest way to remove the power mirrors without cutting the wires.  It seems
> that there is a mount inside the door that is blocking the wire connectors
> from coming through.  do i remove this? or do I just have to cut the wires and
> then rebuild the connectors?  By the way this is from a 87 wolfsburg.

Jason,

If you look at the connectors, you will find that the spade ends can be
slipped out of the plastic housing with a small screw driver or pry tool. Once you
slip them out of the housing, they can be pulled through the hole in the door.
Don't be tempted to cut the wires.

BenT
 <A HREF="http://members.aol.com/bentbtstr8/myhomepage/">Vanagon Cafe</A>