Very easy.  There are three splines on which it fits.
The most fragile is the center spline, as it is a
shaft that goes to the back of the tranny and drives
the oil pump.

Gently place the torque converter on the splines and
slowly spin.  You will feel it slip onto each one.

Thats all there is to it.  No need to fill it with
fliud, as that will happen automatically when you
start up.

Z

--- lauterba <lauterba@BELLSOUTH.NET> wrote:
> Would appreciate any hints and help about putting
> the torque converter back on my automatic
> transmission.
>
> John Lauterbach
> Macon, GA
> '84 7-passenger

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com