Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Fixed Propane Fridge
From:Malcolm Stebbins
Date:Thu, 28 Aug 2003 12:10:05 -0700

I just took a few more digi-pics and put them on
http://photos.yahoo.com/mwstebbins  These are photos
of the controls (toggle switches) front panel
(modified) and the controls on the top of the fridge.
I did NOT change the wiring at all, just the switches.
 See more comments below:

 > --- Shawn Wright <swright@ZUIKO.SLS.BC.CA> wrote:>
> > > Are you saying your fridge will attempt to
> > > re-light if the flame goes out? I've
> > > never heard this before,

On my van (91 CDN westy) I #1) turn on the propane at
the tank.  #2) flip the DC switch to "on".  This
automatically starts the Piezo clicking and the red
light flickering.  #3) Turn the gas on at the fridge.
#4) I press the by-pass switch to get the propane
through, thus over-riding the flame sensor telling the
unit that there is no heat (i.e.  no flame).  As soon
as the gas lights, I hold the by-pass button for 6
seconds (to allow the heat sensor the heat up and
signal to the unit that there's heat (flame) down
there.  #5) set the thermostat.  #6 wait for the ice
cubes :-)   I rarely touch the air pump.

I have owned an 81 USA, and 86 French, and now a 91
CDN (all) Westies.  and Yes they all differ with
regards the fridge controls.

On my 91, If the flame goes out, the piezo (and red
light) again starts, automatically.  Infrequently, I
will hear this in the middle of the night and I know
that the fridge has gone out.

> Interesting. So why can't the piezo do this when
> lighting the fridge normally
> instead of having to repeatedly click the air pump
> knob?

On my 91 CDN, the air pump ONLY pumps air, to overcome
the combustion chamber being flooded with Propane and
no Oxygen.

>  Or perhaps this was an improvement on later models?

Don't know.

> Do you light  yours by clicking the
> the air pump knob (pushing it all the way in)?

No, The DC switch controls the Piezo and is wired into
the heat sensor:  HEAT = no piezo.  NO HEAT = piezo.
Hard wired.

> I would love to have a
> repeating piezo, similar to my home gas stove, to
> speed up the lighting  process...

When my van is forsale, you can buy the van to get the
fridge  :-)    Don't forget the photo.  M

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com