At 12:20 PM 9/2/2003, gary hradek wrote:
>David,
>      My temperature gauge started reading low and now
>it does not work at all.   In all other ways the van
>is working fine,   Well not fine but normal.

Find sender and ground it *briefly* -- needle should head for the sky and
blinker should blink.  Don't ground for more than long enough to get a
full-scale reading.  If no joy, bad contact likely at panel connection
plug.  If success, check local ground and connections.  I think a sender
should be around 50 ohms (maybe 100, I forget which) for full-scale reading.

>     Ekta shows a 049 919 501, 1 pin black temperature
>sender for coolant temperature guage and a 251 919
>501, 2 pin black temperature sender for coolant
>temperature guage thermostat housing.  I recall a
>second sensor near the temp 2 sensor on the thermostat
>housing.   I am guessing that I want to order the two
>pin sensor???   What do you think?   Thanks gary

 From ETKA, if it screws in it's one pin; if it's a clip-type it's
two-pin.  FWIW, Bentley shows a two-pin.

If I left out something let me know, I'm running on fumes and oxycodone
right now.

d

>__________________________________
>Do you Yahoo!?
>Yahoo! SiteBuilder - Free, easy-to-use web site design software
>http://sitebuilder.yahoo.com

--
David Beierl - Providence RI USA -- http://pws.prserv.net/synergy/Vanagon/
'84 Westy "Dutiful Passage"
'85 GL "Poor Relation"