Roger,
My black wire doesn't connect to anything. The end of the wire
is just folded back and tucked in to the harness.
All my sink and water level functions work fine...

Steve
EJ22 -> '86 Westy "Escape Pod"

--------------------

At 03:37 PM 8/31/2003, you wrote:
>>Inside the cabinet adjacent to the water tank where you can access the
>>wiring to the water level sensors, there is a small black plastic box
>>mounted to the wall under the hose from the outside water fill hookup. This
>>black box has green, white, yellow & black wires coming out. The green,
>>white & yellow wires are all connected to water level sensors. The black
>>wire, however, looks like it may have broke or been cut as it goes nowhere,
>>has no connector on the end, and seems too short to connect anywhere anyway.
>>If color logic follows I'm guessing that this black wire connects to the
>>bottom water level sensor which has a black connecting wire coming from the
>>little harness.
>>
>>Does anyone know what this black box is and where I should connect the
>>mysterious black wire?
>>
>>Thanks,
>>-Roger