Hey,
I recently drove my 84' wolfy to DisneyLand.  It was about a 4 hour
drive the way up there, no problems on the way back the van started
overheating constantly and dripping antifreeze (only sometimes not
always)  I then realized that if I pushed in the clutch it idiot light
would go off.  Later I realized that if I turned the blinker on the
idiot light would go on and the temp gauge would go to the top.  I found
that I had a bunch of wires melted together and it was creating a short.
I fixed this but NOW I realized that the antifreeze coming from the
engine was out of the passenger side head gasket.  There is about 3
inches of the rubber just sticking out (looks like new still I had them
replaced recently, the warranty is over tho) I went to the VW dealership
and bought a $10 tube of gasket sealant because I understand that some
sealants can melt the aluminum heads.  What do you guys think about
cleaning the sticking out area and resealing the part of the gasket
sticking out?  I just want sort of a quick fix for it because I'm short
on money and time.  Thanks!