

| Subject: | Re: CAULK YOUR WESTY h2o/ELEC. FILL PORTS!! was Re: REMOVE THOSE |
| From: | Frank Condelli |
| Date: | Thu, 11 Sep 2003 06:01:17 EDT |
In a message dated 9/10/2003 10:50:13 PM Eastern Daylight Time,
LISTSERV@GERRY.VANAGON.COM writes:
> Is there a solution to pour in there at the hole behind the outlets to stop
> rust to prevent the big job of pulling the kitchen out?
>
Yes, you can use Krown Rust Prevention oil or similar. But, I highly
recommend you at least pull the fridge and have a look back there. You will
get a big surprise. If your seeing rust on the outside then that's just the
tip of the iceberg. One thing you can do to alleviate the problem is to remove
the Fiberglas insulation from the middle seam down to the floor, clean up the
mess, pour liberal amounts of Krown in the floor channel, spray the wall and p
anel seams with Krown and shoot Krown in the support rib that's midway in the
panel. Then install Styrofoam insulation panels. It's a PITA working through
the Fridge hole but can be done. Best way is to remove the entire cabinet
unit and do it right. If you don't see rust on your outside seams you should
still do this as preventative measure ! See my <A HREF="http://members.aol.com/Fkc43/fridge.htm">VW Vanagon Westfalia Dometic
Fridge Maintenance</A> webpage for more information.
Cheers��
Frank Condelli
Almonte, Ontario, Canada
<A HREF="http://members.aol.com/BusFusion/bfhome.htm">BusFusion</A> a VW Camper camping event, Almonte, ON, June 10 ~ 13, 2004
'87 Westy & Lionel Trains
Member: <A HREF="http://www.vanagon.com/">Vanagon List</A>, <A HREF="http://www.bcn.net/~limbo/">LiMBO</A>, <A HREF="http://www.westfalia.qc.ca/">IWCCC</A> & <A HREF="http://www.ccvwc.ca/">CCVWC</A>
Vanagon/Vanagon Westfalia Service in the Ottawa Valley
<A HREF="http://members.aol.com/Fkc43/stebro.htm">STEBRO/Vanagon Stainless Steel Mufflers</A> �
<A HREF="http://members.aol.com/Fkc43/busindex.html">Frank Condelli & Associates</A> or http://frankcondelli.comHave something to add on this topic today? Revive this thread in the forum »