On Thursday 11 Sep 2003 19:39, Jonathan Clay wrote:

> I have an issue w/my '90 Westie!!!   She/He/It won't start, I mean
> she/he/it won't even turn over.  Today i checked to see it there is

I've been having this problem recently... re-did the ground connections
etc. Turned out the feed from the battery simply wasn't strong enough to
turn the engine over (12 month old battery, and alternator are both OK).

Anyhow, try running a direct positive feed from the starter connection to
the solenoid sitting  on top of it. If it turns the engine over, it's a
Good Thing. If that worked, try the same again with the ignition switched
on - it should start.

If this helps, simply fit a direct connection to the battery (or an
appropriate feed - eg. the big fat RED cable on the starter itself) via an
inline fuse and relay (search the archives for "ford solenoid") and use
the original wiring from the ignition switch to trigger the relay.

Worked for me, now I don't need to keep getting one of the kids to start
the thing while I execute a well aimed blow at the starter motor!
--
Tim
PGP Key ID: 525e6a47
Available from http://pgp.mit.edu