At 05:39 PM 09/17/2003, you wrote:

>Hey all,
>I have a question...is there a way to cut off the metal clamp/ring that
>  type3 squareback that i
>had....everyone on the type3.org list said that you could...and indeed
>with a little sweat you could....are the 2.1 ltr. fuel injectors the
>same?

Very much the same. Be sure to get the German smooth FI hose, 7X3. A crimp
type Gemi clamp (original equipment) is best, a good spec FI full circle
screw clamp will do, paying attention that you set them so they get along
with others nicely in the "hood". Don't want to be gettin' in the way of
them Lectric Boys trying to hook up.

Any place that carries the Continental metric hose and belts will also have
good clamps. STAY AWAY from the cheap holes thru the band type clamps at
the typical HOT ROD FLAPS counter. SOMEONE WILL OVERTIGHTEN THEM AND THEY
WILL CUT YOUR NEW HOSES. The good clamps have no holes in the band but the
threads are formed into the band, and the edges are relieved to cushion the
hose with plenty of squeeze and no cut hoses nowherenowaynohownotnownorever.