Hey there,

1. Yes.  Nicely with a puller.  Not so nicely without
one.

2. It sounds like it is breaking apart.  Easiest way
to check with little effort is to drop the lower
covering, unplug the ignition switch, and plug that
into a new switch.  Try to turn the new switch in your
hand with a screwdriver.  Does require you to buy a
switch, but sooner or later you will need it anyway...

3.  Sounds like you need to bleed the system.

Z
--- K G Gilbert <KG2CHIEF@AOL.COM> wrote:
> 1. I just replaced starter motor on my 84 westy.
> Does a new bushing really go
> in there? Where? How?
> 2. How do I know my ignition switch is bad? My 84
> experiences intermittent
> slow or no-start, usually in warmer weather. It
> seems I have to turn the key ALL
> the way  to start. Problem seems worse w/ new
> starter. Hmmmm...
> 3. Temp warning light blinks several minutes after
> start up. Recent changes
> include plugs/fuel and air filters/dist. cap and
> rotor/and starter -  which
> required disassembly of air filter housing and
> throttle body.
> TIA,
> Kevin

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com