Check your fuses and then your grounds.  Try turning the fuses if these are
not blown.  Sometimes those jelly bean type fuses lose contact and you need
to move them to get the current flow back.  Hope this helps,

Ken Wilford
John 3:16
http://www.vanagain.com
http://www.strictlyvwauctions.com
Phone: (856)-327-4936
Fax: (856)-327-2242

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Karl Ploessl
Sent: Thursday, October 02, 2003 9:24 AM
To: vanagon@GERRY.VANAGON.COM
Subject: problems with high beams

        problem: activating the high beam switch turns off the low
beams but no high beams are coming on. Incidentally, recently the
high beam indicator light glows when I turn on the headlight switch
(but that occurrence is new, whereas the high beams had the problem
for some time). Any ideas?
--
Karl
'81 Westy "Jenny"
Wilmington, DE