Or its your relay.  The relay moves juice from the low
beam to the high beam contacts.  If your high beam
contacts are worn/burned in the relay, there will be
no juice flowing to them.

Z

--- Kenneth Wilford <kenwilfy@COMCAST.NET> wrote:
> Check your fuses and then your grounds.  Try turning
> the fuses if these are
> not blown.  Sometimes those jelly bean type fuses
> lose contact and you need
> to move them to get the current flow back.  Hope
> this helps,
>
>
> Ken Wilford
> John 3:16
> http://www.vanagain.com
> http://www.strictlyvwauctions.com
> Phone: (856)-327-4936
> Fax: (856)-327-2242
>
> -----Original Message-----
> From: Vanagon Mailing List
> [mailto:vanagon@gerry.vanagon.com]On Behalf
> Of Karl Ploessl
> Sent: Thursday, October 02, 2003 9:24 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: problems with high beams
>
>
>         problem: activating the high beam switch
> turns off the low
> beams but no high beams are coming on. Incidentally,
> recently the
> high beam indicator light glows when I turn on the
> headlight switch
> (but that occurrence is new, whereas the high beams
> had the problem
> for some time). Any ideas?
> --
> Karl
> '81 Westy "Jenny"
> Wilmington, DE

__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com