I would be very interested in what RIMCO might have to say. 18 one inch
studs have nothing at all to do with a T-IV motor. You paid for them, so
ask them to send the right ones or explain. The only studs that short that
come to mind are 2 for the plate on the bottom of the motor. The exhaust
port studs should be some 50mm or 2 inches long.

At 09:27 AM 10/20/2003, you wrote:

>SNAG:  The studs they sent for my beautifully re-worked heads won't work!
>They sent me 14 (?) studs that were about 1.5 inches long and 18 (?) studs
>that were a whopping 1 inch long.  The longer ones will work for the
>intakes, but not anywhere close for the exhausts.  And I have no idea what
>the 18 one-inch studs would possibly be used for!