Jason,
    Here is a permanent cheap fix.  Its better than new.
Clean the entire thing, well with brake clean.  Use a
good exopy glue that can take heat like JB weld,
and glue it in place.   I was strandded on a Sunday
night, and used this as a temperary fix.  This was
5 years ago.  It is stronger than the original, when
glued, and you do not have to dismantle the
distrubutor.
                                               Eric

JasonPufahl wrote:

>Hi all..
>
>I have a 1986 2.1 WBX westy camper and am trying to figure out how to get a specific distributor part.  In the Bentley manual it is labeled as the Hall Generator.   The electrical plug on mine is pretty cracked up and the wires are in bad shape.  I don't want to buy an entire distributor if I can avoid it.  I called Bus Depot and they can't find it without the part number, I called VW and they have a picture of the part but no part number either.
>
>Any ideas on how to approach this?
>
>Thanks,
>Jason
>
>
>
>