I'm sure a dealer would have them or try Van-again or other on-line
parts dealers like go westy.

JFF

>nope
>
>thats what's missing.  i figured it was something like that.  where
>can i get some?
>
>jason
>
>  >From: JordanVw@aol.com
>  >To: pooncerelli@HOTMAIL.COM
>  >Subject: Re: swivel seat slop
>  >Date: Tue, 11 Nov 2003 09:09:38 EST
>  >
>  >In a message dated 11/10/03 6:14:24 PM Eastern Standard Time,
>  >pooncerelli@HOTMAIL.COM writes:
>  >
>  >
>  > > this weekend i bought some swivel seat base plates for my 87 westy. the
>  > > plates came from an 85 westy. i already have the main base
>plate installed in
>  > > my van, you know the one that is tack welded in place. anyways
>i cleaned up
>  > > the swivel plates and regreased them. i installed them and slid
>my captain
>  > > chairs in place. well, there is a good 1/2 inch play in the
>swivel from side
>  > > to side. is this normal? even with the seat off you can feel
>all the play in
>  > > the bases from side to side and up and down. the base is totally tight. i
>  > > greased them with bearing grease. is there supposed to be
>another piece for
>  > > the chair to ride on. everything else seems fine just too much play. what
>  > > should i check for or is this normal.
>  > > jason
>  > >
>  > >
>  > >
>  >
>  >dood do you have the plastic spacers in there? there are 4 of them. if they
>  >are missing you will have slop.
>  >
>  >chris
>
>
><http://g.msn.com/8HMBENUS/2740??PS=>Crave some Miles Davis or
>Grateful Dead? Your old favorites are always playing on MSN Radio
>Plus. Trial month free!