The pump is installed sucessfully. The cross over pipe leak checked good.
I used the copper sealer and a 1 1/4 outside diameter 1/8 thick
oring...suggested by someone on the list...If 1/8" was the same as 3mm on my
micrometer...maybe 1 1/4 is the same as 25mm, as someone else suggested. I used the copper
sealer directly on the pipe prior to placing the O-ring on, then I applied a
thin coat of sealer over the ring...with my finger I applied a light coat of
copper sealer in the housing area as well.
All info was taken with great thought...
Filled/Bled/leak checked complete.
Thanks!
LR
PS my thoughts on the oring material after searching for the right size and
material oring are: Oring Material seems to be made of the same stuff. The
oring behind the water pump is the same as the oring at the thermostat and the
oring I used for the pipe/housing area was a Black Oring as well...I'm sure if I
spring a leak there in the near future I shall let the list know!