Go to www.mcmaster.com.

90591A154

Metric Zinc-Plated Steel Hex Nut Class 8, M7 Screw Sz, 1mm Pitch, 11mm
W, 5.8mm H
$ 1.67 per Pack
This item is only sold in Packs of 100

 Packs of 100

Unfortunately only grade 8 but it will work.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of jeremyp
Sent: Saturday, November 15, 2003 10:35 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Rocker Bolts

I have an 82 Vanagon 2.0L Type 4.

I was wondering if you all know what size nut I need for the studs that
hold the rockers in place on the head?  I noticed the shaft looks a
little tapered, is this correct?   I thought I picked up the right nuts
tonight, but they are just a little loose.  I'm hoping I won't have to
pull the head again and take it in to compare bolts.

I have successfully replaced my dead piston and two jugs - without
removing the engine and it was a pain. (don't ask.)  I have the head
back on and am looking forward to getting it running again!

Thanks!
Jeremy

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.509 / Virus Database: 306 - Release Date: 8/12/2003