Doing this would require at least that the crank shaft end play
be setup again, as the flywheel that you would be removing
adjusts this.

            Eric                   86-VW4x4
            vw4x4@fyi.net          86-SS Syncro
            Pittsburgh, PA USA     1936-Chrysler
                                   92-Jetta GWC
            www.fyi.net/~vw4x4/vw4x4.htm

On Thu, 27 Nov 2003, Jesse and Monica Johnson wrote:

> Can you swap an engine from a 4 speed vanagon to a auto vanagon? Do you
> just remove the clutch and bolt up the auto instead?
> There is no difference between the engine itself right?
> Any help would be great...
> thanks all,
> jesse
> 89 carat
>