----- Original Message -----
From: "Tim Beidel" <tbeidel@MAINE.RR.COM>
>
> 1. How do I remove the window crank?
>

The cover peels back by hand from the attachment end, and a phillips-head
screw is exposed.

> 2. Are there any other impediments to removing the panel once the crank
and handle are removed? (I do not have the armrest that shows up in Bentley
> diagrams.)
>

Maybe the latch cover plate. I can't remember if it comes off with the panel
or not. Any closing handle will likely have to come off also. I think my
panels are held in by metal clips. There are some special interior service
tools available to help it go smoothly; usually sort of like a two-pronged
fork for prying. If you just start pulling the cardboard may tear where the
clips mounts.

> 3. Once the panel is off, do I have to remove the plastic film that
protects
> against moisture? If so, can I reattach the same piece of film? With what
> type of glue?
>

I doubt there's anything specific. Pull it away where you need to access the
parts in question. The stickum might still hold upon reinstallation.
Probably an interior tack adhesive would do, as well.

Jon Schaer
Columbus, OH
85 GL