Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: voltage Stabilizer/Regulator - Correct Part?
From:Kenneth Wilford
Date:Thu, 4 Dec 2003 11:04:50 -0500

Check your output voltage at the battery.  Perhaps your alternator is
putting out more than 14 volts and frying your voltage stabilizers.  I
have these for around the same price as the shack if you want an OE one.

Thanks,
Ken Wilford
John 3:16
http://www.vanagain.com
http://www.strictlyvwauctions.com
Phone: (856)-327-4936
Fax: (856)-327-2242

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of karen davis
Sent: Thursday, December 04, 2003 10:08 AM
To: vanagon@GERRY.VANAGON.COM
Subject: voltage Stabilizer/Regulator - Correct Part?

I've been blowing voltage stabilizers (3 prong thingie under dash).
I've gone through 4 and still  I haven't found the root of the problem.
My gas/temp gauge are at zero.  With new stabilizer, gauges works for
awhile and then they go to zero and I have to put in new stabilizer to
get gauges to work again.

I've been paying $5-7 for these voltage stabilizers.  I see that my
local Radio Shack carries...they look the same as the ones that I've
been getting at car place.  Problem is that Radio Shack has 2 that look
the same.  Once says 7 and other says 14.2.  Can I use the radio shack
stabilizers (they
call them regulators).    If so, which one do I get?  They only cost
$1.49
or $1.99 which is a lot cheaper than what I've been paying.

Of couse, the ultimate is to be able to fix the problem so my guages
work. Thanks

_________________________________________________________________
Don't worry if your Inbox will max out while you are enjoying the
holidays. Get MSN Extra Storage!  http://join.msn.com/?PAGE=features/es