Alan,

The digitool was designed primarily for the 2.1l engine, but will work
with the 1.9.

Following is what the maker, Darrell Boehler said about this a few months ago:

   The 3.0 digitool which I have been making for several years now will
work on 83.5 - 91 vanagons. I make no others units. It will also work
on digijet units but I don't normally support the digijet configurations.
In case you may have missed the fact I will remind you that you will need
to send your ecu to me so I can add a cable with a 25 pin D shell
shielded  modem cable to the ecu. The digitool cable attaches / mates up
to the added connector when you hook up the tool. I charge $100 for the
digitool. This includes adding the cable to one ecu and shipping your way.
Additions to additional ecus are $10 each.

   Check with me before sending your ecu I sometimes don't have tools make up.

   Thanks for your interest.

Darrell Boehler
307 Gypsy Tree
Makanda Illinois 62958

For more info go to:

http://www.loam.org/vw/Vanagon/DigiTool/

Hope this helps,

Sam

--
Samuel L. Walters
Attorney at Law
GIS and Demographic Consultant
Mediation and Alternative Dispute Resolution

2636 N. Calvert St.
Baltimore, MD 21218

410-235-3086 (voice/fax)
410-598-6068 (cell)

All incoming and outgoing email scanned by
regularly updated Norton AntiVirus.

--
Sam Walters
Baltimore, MD

89 Syncro GL
85 Westy Weekender
84 Vanagon, original owner, soon to be retired, just too many problems

All incoming and outgoing email scanned by
automatically updated copy of Norton AntiVirus.