G'day Jay, Mathew, Eric, Thanks for your response. I checked the O2 sensor
for shorts or bad wiring and found none to be present will be replacing the
Temp II sensor today and will see how that goes.
To add to the list of things done. Also replaced O2 Sensor, Spark Plugs  as
well as a compression test and all cylinders showing 145psi even which I
forgot to mention sorry.
Could it be carbon build up not letting valve sit right?

Sounds more like right about the time the FI goes closed loop.  Look for
short in O2 sensor wire or the Temp II sensor.

Jay

Eric Zeno <vw4x4@FYI.NET>@gerry.vanagon.com> on 12/16/2003 09:54:07 AM

Please respond to vw4x4@FYI.NET

Sent by:    Vanagon Mailing List <vanagon@gerry.vanagon.com>

To:    vanagon@GERRY.VANAGON.COM
cc:
Subject:    Re: engine miss

Do a compression test.  Sounds like a burn valve.
                  Eric

Peter Pollard wrote:

>Hi all my name is Peter. I live in Australia and recently purchased a 92
>syncro transporter and have a engine miss. The van starts fine and runs
>smooth for about 40 seconds then the revs drop and the miss kicks in. The
>miss in like in a cycle every 2 secs. have replaced cap, rotor, leads, 02
>sensor, cleaned and tested idle stabilizer, adjusted throttle switch, new
>air and fuel filters, capacitor fix on air intake and had fuel injection
>cleaned inline.
>the only things left to do is temp sensor 2
>Man I want a digi tool lol !!!
>If any one can help and Aussie please let me know.
>All the best SyncroPete.
>PS great site thank you all.
>92 VW Transporter Syncro.