There are three perimeter bolts and one center bolt in the fan.
Remove these, bump the fan belt ring with a rubber hammer and it should fall
off in your hands.
The fan must be removed to reach the four mounting bolts that hold the front
half of the fan shroud on.

Stan Wilder

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Zoran Mladen
Sent: Saturday, January 24, 2004 8:07 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: fan shroud removal

Yes it does.

Z

Jake Beaulieu <jake_beaulieu@YAHOO.COM> wrote:
I just pulled the tranny and engine from my 1982 Westy a couple of hours
ago. The engine is up on the stand and I trying to remove the fan shroud and
fan. I pulled the bolts that hold the fan in, but I can't seem to break it
loose. Does the fan shroud need to be split before the fan can be removed?
Thanks,
Jake

---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!

---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!