----- Original Message -----
From: "tabe johnson" <xtabe@YAHOO.COM>

> Today, I measured the fuel pressure.  The spec is
> 29 PSI at idle and 36 PSI with the vacuum line removed.
>
> My regulator is giving me 34 PSI at idle and 40 PSI
> with the vac line removed.  So the regulator is working
> but is giving me pressure a bit high.
>
> Anyone else have a reg like this?  Did you change it?
> Did the engine's running improve?
>
> --tabe johnson
> xtabe@yahoo.com
>

I just replaced my fuel pressure regulator yesterday on my 84 1.9l and found
almost exactly the same thing.  My previous regulator died & the pressure
went so high it eventually blew off a line at the firewall.  Put the new one
in & it reads 32-33/39.  Runs fairly normal (a little rough idle when cold)
but smooths out when I disconnect the vacuum line to the regulator & the
pressure jumps to 39.  I kind of figured being off by +3 lbs was probably
due to tester inaccuracy, but now I see it may not be.  At least now I can
troubleshoot the rough idle problem without thinking its the regulator.

Greg Obermier