Not on the Digijet!  It is mechanic and vacuum advance!  It is not
controlled by the ECU!  The stabilizer is out of the loop when the engine
is above idle speeds.

      Jay

"Daniel L. Katz" <katzd54@YAHOO.COM>@gerry.vanagon.com> on 01/28/2004
04:51:14 PM

Please respond to "Daniel L. Katz" <katzd54@YAHOO.COM>

Sent by:    Vanagon Mailing List <vanagon@gerry.vanagon.com>

To:    vanagon@GERRY.VANAGON.COM
cc:
Subject:    Re: Bad Idle Stabilizer?

note that max advance is 40 - 50 deg BTDC. therefore, varying initial
setting by a few degrees is not critical under most driving conditions.

dlk

This communication is for use by the intended recipient and contains
information that may be privileged, confidential or copyrighted under
applicable law.  If you are not the intended recipient, you are hereby
formally notified that any use, copying or distribution of this e-mail,
in whole or in part, is strictly prohibited.  Please notify the sender
by return e-mail and delete this e-mail from your system.  Unless
explicitly and conspicuously designated as "E-Contract Intended",
this e-mail does not constitute a contract offer, a contract amendment,
or an acceptance of a contract offer.  This e-mail does not constitute
a consent to the use of sender's contact information for direct marketing
purposes or for transfers of data to third parties.

 Francais Deutsch Italiano  Espanol  Portugues  Japanese  Chinese  Korean

            http://www.DuPont.com/corp/email_disclaimer.html