

| Subject: | Re: ignition switch part # |
| From: | John Carpenter |
| Date: | Tue, 3 Feb 2004 18:00:52 EST |
Quite easy to replace. Take off the steering column cover (two screws, Pull the horn cover straight up & off, do not remove wires. Take off steering wheel. (Large nut), hit from below, towards yourself, with the palms of your hands. This exposes the switch. You do not have to take out the whole key switch assy. First unplug the switch. Take a #1 phillips, lay on your back on the floor, so you can see the screw, and remove screw on key switch. Pull switch out. You can test the switch I am told, from the fuse panel. there is an empty relay plug-in # 2, I believe. Check there for power. John C. SLC, UT 85 & 91 Westys... In a message dated 2/3/04 2:14:36 PM Mountain Standard Time, dkahler@UPS.EDU writes: I've narrowed my problems down to the electrical ignition switch in the steering column thanks to list help... Now, can anyone tell me what the part # is for the ignition switch? And if anyone's replaced it before and can lend me some do's and don'ts or other advise for replacing this I'd be enormously grateful! Nice to have you guys to call on! Thanks for helping the newbie! Dylan dkahler@ups.edu '85 Westy Campmobile
Have something to add on this topic today? Revive this thread in the forum »