

| Subject: | Re: "Steel Wheels" (Rolling Stones, road music content ??) |
| From: | David Marshall |
| Date: | Tue, 10 Feb 2004 09:14:09 -0800 |
Tom, My TriStar has OEM VW steel wheels. 14x6.0" ET30 with 205R14 tires on it. David Marshall Fast Forward Automotive Inc. 4356 Quesnel-Hixon Road Quesnel BC Canada V2J 6Z3 http://www.fastforward.ca mailto:sales@fastforward.ca Phone: (250) 992 7775 FAX: (250) 992 1160 - Vanagon Accessories and Engine Conversions - Vanagon, Transporter and Iltis Sales and Importation - European Lighting for most Volkswagen models Due to the large volume of email we receive, PLEASE include previous emails when responding. This will allow us to read the complete dialogue in one message and will result in quicker and more accurate responses. -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf Of Carrington, Tom Sent: February 10, 2004 8:38 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: "Steel Wheels" (Rolling Stones, road music content ??) None of the OEM VW Vanagon rims are wider than 5.5". On my CrewCab, I'm running 14x6 steel Mercedes-Benz wheels. They are dirt cheap (I paid $80 for a set of 4), have the exact proper offset and are a DIRECT BOLT ON. All I had to do was remove the pesky retaining bolts on the rear drums. And they almost look like factory rims. A picture of the rims on my CrewCab can be seen at: http://volksweb.relitech.com/party2002.htm (Note: Click on thumbnails for expanded images!) These wider rims allow me to run 27x8.50R14 tires safely (minimum width as recommeded by the tire manufacturers is 6"). I'll post the MB part numbers if anyone is interested. TomC tcarrington@relitech.com http://volksweb.relitech.com -----Original Message----- From: Matthew To: vanagon@GERRY.VANAGON.COM Sent: 2/9/04 8:00 PM Subject: Re: "Steel Wheels" (Rolling Stones, road music content ??) ok, which ones were wider that 5.5"? > Most (not all) of the stock 14" steel wheels on Vanagons were 5.5" wide > rims.
Have something to add on this topic today? Revive this thread in the forum »