It shows how to do this in the Bentley but basically after you get done
unhooking everything you twist the regulator and cables until they
becomes a straight line and then pull it out of the hole near the bottom
of the panel.  It is easy once you do it one time.

Thanks,
Ken Wilford
John 3:16
http://www.vanagain.com
http://www.strictlyvwauctions.com
http://www.eurovan.org
http://www.vwcabrio.org
Phone: (856)-327-4936
Fax: (856)-327-2242

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of HOTZE, BRETT C [AG/1000]
Sent: Wednesday, February 18, 2004 10:32 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Removing the Power Window Guts for repair

Any help on how to remove the internal works for a 90 Vanagon Carat
power front window system would be greatly appreciated.  I have pulled
the door panel and released the window from the glide and removed the
nuts and bolts that hold the system in, is there some sort of trick to
pull the system out through the openings in the door frame? /Brett