The control cables tend to bend and distort if they have too much
resistance.
The adjustments are often critical to get the right combination.
You should be able to see bent / damaged cables down through the ashtray
opening or down through the instrument area after the cover is removed.
The adjustments are on both the slider control and on the air flow control
box under your dash.
You'll need to remove the glove box to get to some of the cable adjustments.

Stan Wilder

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Adam B
Sent: Wednesday, February 25, 2004 4:25 PM
To: vanagon@GERRY.VANAGON.COM
Subject: heat slider switch

Hey,
The slider switch for my heat control seems to be stuck.  I can slide it to
one end and the other, but it pops back to the middle. Any ideas what i can
do
to loosen it up? How do I get in there?

Thanks
Adam
86 Vanagon GL