

| Subject: | Re: tranny leak at stub axle |
| From: | Jere Hawn |
| Date: | Sun, 29 Feb 2004 09:11:47 -0800 |
Hi Warren, When I did my CV joints last I found that seal, mine had popped out. I just took a small soft hammer and tapped it back in. It fits and looks similar to one of those old V-8 freeze plugs. Jere 90 GL 88 GL -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Warren.K.Lail-1 Sent: Sunday, February 29, 2004 6:20 AM To: vanagon@GERRY.VANAGON.COM Subject: tranny leak at stub axle When I pulled the transmission out of Billy Bones, it and the engine were covered in oil and dirt and lots of grease. So I took the tranny to a car wash and cleaned it thoroughly. Yesterday I went to drain the old tranny fluid out in preparation for my Redline MT90 only to find a leak. Whoa, that Redline costs too much to dump in and watch it leak out. It appears to be leaking where the stub axle connects to the transmission housing. Is there a seal back there that can be replaced without too much trouble, or am I going to need to pull the tranny back out? Please say no to the latter :( Warren 88 Westy "Billy Bones" 87 GL
Have something to add on this topic today? Revive this thread in the forum »