You need anther wrench on the block that the nut tightens to, whatever
that may be. There'll be a square surface somewhere to put wrench jaws
on.

Since you moved the assembly, even a little, I would advise mixing up
some soapy water and brushing it liberally wherever there are fittings
between the copper tube and the tank. It could be dangerous to have a
leak there, but it's definitely going to be disappointing when you to
to use your gas stuff and the tank is empty.

Last weekend I installed a heater in mine, and I can tell you can't be
certain the connections aren't leaking until you test with soap and
water.

Jim

On Mar 2, 2004, at 3:54 PM, Jay Roth wrote:

> I'm trying to remove my propane tank to replace the valve on my '87
> Westy and am
> having a difficult time removing the tapered nut that connects the
> copper tube
> to the tank assembly. Every twist with a wrench results in the whole
> assembly
> turning. Any suggestions? Note: I don't believe it's ever been removed
> before,
> but  have loosened the bolts holding the tank to the vehicle thanks to
> PB Blaster.
>
> In VW Love, light & laughter
> Jay
> '87 Westy,"Ol' Blue,"  327K
>