Hi All,

We all agree that this is a pain.  I question the VW dealers service
department.  To do it correctly you need to crack the vent valve on the aux
heater core which means removing the bench seat and the cover.  Something
inside me says that they don't do this procedure.  Why, because the system
will blow the air out??? Or will it?

Jere
90 GL/Carat-a-version
88 GL

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
George Goff
Sent: Thursday, March 04, 2004 10:06 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Purging Cooling System of Air / Where Would We Be Without This
Topic?

In a message dated 3/4/04 11:55:06 AM, katzd54@YAHOO.COM writes:

<< . . .  wouldn't it always be prudent to subsequently crack that bleeder
screw to make sure all air was purged

although air bubbles do get buoyed up, if there is a local maximum in
height somewhere, air can get trapped, and require a standard bleeding
method to purge.
>>

Not prudent, but necessary to vent all the air from the system.  The 4 air
vents (rear heater core, radiator, 2 self installed) I use are opened in
order
from the lowest to the highest until each flows a stream of coolant.

I think you might be confused about what I do to vent the air from the
system.  What I do is best described as the standard bleeding method with
enhancements.

George