

| Subject: | Re: Water in interior panel by slider |
| From: | vanagon |
| Date: | Sat, 6 Mar 2004 23:13:47 -0800 |
I am not sure where it is coming from, one poster said check the rear wiper fluid which I did and its topped off no leak there. the water seemed to be rain water and not coolant but it might still be, because I noticed I had coolant under the mattng near the heater so my core or hose is leaking. I intend to pull the rear core and re-purge the sytem, the factory way as soon as I get some other stuff done. The only other place it can get in is the side window. the rest of the body and roof are sealed. I am looking for a set of 88 on rear quarter windows with the chrome - less weather stripping to update my 87 Syncro with if anybody has a set cheap please let me know. When I do pull the windows out I will look and see if there is a leak, I am thinking there is. Also there should be a drain hole in the bottom of that thang. jeez 3 inches of water rollng around in your body metal is great for rusting out your rig. Doug ----- Original Message ----- From: "Jere Hawn" <jbrschawn@earthlink.net> To: "'vanagon'" <vanagon@astound.net>; <vanagon@GERRY.VANAGON.COM> Sent: Saturday, March 06, 2004 10:11 PM Subject: RE: Water in interior panel by slider > Doug, > > I've got the same problem. Today when I was changing the rear heater core I > discovered the same thing. I do not know where it is coming from. I > suspect that it comes from the sliding door latch bolt holes but I'm not > sure. If you find out please let me know. > > Thanks > Jere > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > vanagon > Sent: Saturday, March 06, 2004 2:04 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Water in interior panel by slider > > Hi all, > I pulled my back bench seat out and the angled interior panels out and began > vacuuming and found almost 3 inches of standing water in the interior panel > by the slider. This is below the passenger side rear quarter window which > must be leaking around the seal? I know there is factory was sprayed down > in there but apparently it holds water with no small drainage? where can I > drill from underneath to let the water out. It seems lower toward the > front. > > Anybody else run into this? > > That darn rust behind the window seals is a bugger, I've got it on the > windshield of my 85 too. leaks to the passenger foot well when it rains > hard. > > Thanks, > > Doug >
Have something to add on this topic today? Revive this thread in the forum »