I need to separate the tie rod end from the steering knuckle to replace the
boot on the steering rack. I suppose I could use a "pickle fork" to separte the
tie rod end, but my guess is this would ruin the tie rod end boot.

Is there enough room around the tie rod end to use a gear puller--say maybe a
4" or 6" type with the two arms or hooks-- to separate the tie rod end from
the knuckle. I don't want to buy the puller if it won't fit in these tight
quarters around the steering knuckle/tie rod end/brake backing plate and aid in
the separation. Any other ideas to keep from damaging the tie rod end and tie
rod end boot for this repair?

Thanks
Jeff
83.5 Westy
LA,CA