----- Original Message -----
From: "zolo" <zolo@FOXINTERNET.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Tuesday, March 23, 2004 2:11 PM
Subject: Aircooled wireing...

> I am supposed to figure out some wireing on an air cooled with
> Hall sender unit.  My own van is without it and so it does not help
> me any.  There are two wires I don't know where they go.  One is
> on the left, next to the fire wall, very short and green in color.  It is
a
> female.  I must be a commonly known one.  The wire is also a little
> bigger size than the small wires around there.  It is a thick green,
> short wire at the 3-4 head on the left.

That sounds like the connection to the O2 sensor.  It's thicker than normal
because it's a coaxial wire, with a sheath around the main signal wire.
There's a hole in the tin - with a grommet - where the wire from the O2
sensor (located on the exhaust) comes into the engine compartment.

> The other one is coming out of the bunch on its own, with its own
> black cover on the left, it is long, about over one foot in size.  On
> its end there is a white connector that is connected to a short wire
> that has a female on its end.  Where is that supposed to go to?
> This is a blue-black color coded wire.

If you're saying this wire comes from the left side of the engine
compartment, somewhere behind the black junction box, and has its own black
sheath, that sounds like the connection to the oil pressure sender.
---------------------------------------------------------------
Tom Young                       '81 Vanagon
Lafayette, CA 94549         '82 Westfalia
---------------------------------------------------------------