

| Subject: | Re: Vanagon Application???? |
| From: | Eric Zeno |
| Date: | Sun, 18 Apr 2004 01:12:06 -0400 |
Yep... it you are a terroist
...........................,,,,,,,,,,,,,,,,,!
Eric 86-VW4x4
vw4x4@fyi.net 86-SS Syncro
Pittsburgh, PA USA 1936-Chrysler
92-Jetta GWC
www.fyi.net/~vw4x4/vw4x4.htm
On Sat, 17 Apr 2004, John Rodgers wrote:
> My son runs a window tinting business and does commecial and military
> contracts. On one recent military contract he installed bomb-blast proof
> window tint on some military buildings. The plastic film that was used
> will stop a 45 caliber bullet fired from ten feet away. Thg glass under
> the film will fracture, but the film - like all tint films - is glued to
> the surface of the glass and holds the glass together to prevent glass
> shards from becoming shrapnel and flying everywhere hurting people and
> causing other damage. To prevent the entire pane of glass from coming
> out of the frame during a blast and flying across a room like a frisbie
> and cutting off heads, the edges of the tint are sealed to the window
> frame with a 3M industrial tape that has a glue strength and fabric
> strength like nothing I have ever seen. Amazing stuff!!! This tape in
> this application is two inches wide - 1 inch over the tint film, and one
> inch over the window frame. It is heated to 400 degrees to trigger
> curing. Once cured, the window frame, the tape and the tint are all like
> one continuous piece, and a blast would virtually have to blow the
> window frame out of the wall to damage the area on the opposite side of
> the glass. The main point being though, to control flying glass.
>
> So, anyone see any application for this tape on the Vanagons?
>
> Regards,
>
> John Rodgers
> 88 GL Driver
>Have something to add on this topic today? Revive this thread in the forum »