

| Subject: | Re: problems on the road |
| From: | jesse johnson |
| Date: | Thu, 15 Apr 2004 20:26:19 -0400 |
problem one.. do you have a genuine mann oil filter? don't use a fram ... run 20w 50 oil in temperatures above 60 degrees.. always... that should fix your problem.. if not.. you have a worn out engine or oil pump... problem two... oxygen sensor or temp 2 sensor.. but i would say oxygen sensor.. problem three.... new thermostat seems in order.. hope this helps... jesse 89 carat On Apr 15, 2004, at 7:37 PM, Matt Slater wrote: > So let me give you a quick history of my "new" 89 Vanagon GL. So far > I've > replaced the heads, water pump, the pipe that connects the pump to > thermostat, temp relay in the radiator, temp sender, and finally the > distributor. > > Now here's my new problems. > 1) On a drive from Flagstaff to Moab the oil pressure light and > buzzer come > on once the engine is heated up quite a bit, it only happens when > going up a > hill and the RPMs drop below about 2600 or when slowing down when > approaching a town and again the RPMs drop down. As soon as the RPMs > go > back up (downshifting) the buzzer and light go back out. > > 2) The idle is all crazy. When I start the engine it does better but > after > warming up it really starts to jump around a lot until it dies. Also, > when > I come to a stop and push the cluth down the van cuts out also. > Everytime > it does this it just fires right back up but the idle is still all > crazy. > > 3) The van seems to be running a bit hot before the fan turns on. > I've > seen it go up to about 7/8 of the way up before the fan comes on. Now > I > thought that replacing the relay in the radiator and the temp sender > would > alleviate this (of course they were both bad anyways so they had to be > replaced). Coolant isn't leaking anywhere. I'm just getting kind of > tired > of driving through the desert with my heat on full blast. > > Any suggestions on what may be the problem or if this thing is safe to > drive > back to Flagstaff (about 300 miles) would be greatly appreciated. > > Matt
Have something to add on this topic today? Revive this thread in the forum »