What do you mean by, "repacing the can on the back"?

I have done everything except that!

Also, where did you get the replacement paste?

Rex
----- Original Message -----
From: "David and Shirin" <daveshirin@ENERGYUNITED.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, May 17, 2004 12:12 PM
Subject: colder fridge

I took my fridge out to clean it last week, the cumbustion chamber had lots
of rust flakes, but the fins on the back were quite clean.  I am adding a
fan and thermomitor to the inside, replacing the paste on the cold sink, and
replacing the can on the back.
    Has anyone tried adding a bit more insulation to the bottom, top and
back.  I have some 1/2 inch "felt" stuff with a reflective aluminum facing.
I am going to see if I can fit it to the fridge and see if it helps any.  It
also seems like it would be a good idea to wrap the intake and exhaust pipe
in fiberglass insulation to keep the heat in the pipe and move it outdoors
instead of having the bare pipe acting like a radiator.

David
1982 Westy

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.682 / Virus Database: 444 - Release Date: 5/11/2004