In a message dated 17/05/2004 5:20:50 PM Eastern Daylight Time,
LISTSERV@GERRY.VANAGON.COM writes:

Soo...  for anyone who has attempted this, what kind of sealant should I
use, if  any?  I was thinking 3M Weatherstrip Adhesive.  And any other  words
of wisdom come to mind for doing the job right the first  time?

I'm just about to do the same job today on my  newly acquired 1990 Carat.  Do
not use sealant.  Use liberal amounts  of a rust preventive oil such as Krown
on both the seal and the metal lip.   The rope trick it the only way to go.
Make sure the ends are at the top  centre and crossed a good 12 inches to
insure you don't loose an end in the  process.
Cheers,

Frank  Condelli
Almonte, Ontario, Canada
_BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper
camping event, Almonte, ON, June 10 ~ 13, 2004
'87 Westy, '90 Carat &  Lionel Trains
Member: _Vanagon List_ (http://www.vanagon.com/) , _LiMBO_
(http://www.bcn.net/~limbo/) , _IWCCC_ (http://www.westfalia.qc.ca/)  & _CCVWC_
(http://www.ccvwc.ca/)
Vanagon/Vanagon Westfalia Service in  the Ottawa Valley
_STEBRO/Vanagon Stainless Steel  Mufflers_
(http://members.aol.com/Fkc43/stebro.htm)
_Frank Condelli &  Associates_ (http://members.aol.com/Fkc43/busindex.html)
or  http://frankcondelli.com